Trend Lock Jig

Door thickness min.=34 mm|Door thickness max.=58 mm|Template outer size=234.3 x 59.8 x1.5mm|Metric (Imperial approx.) (D x OL)=Template|22.2x156 mm (7/8"x 6 1/8")=1|22.5x152.5 mm (7/8"x 6")=2|25.4x121 mm (1"x 4 3/4")=3|25.4x127.5 mm (1"x 5")=4|25.4x133.5 mm (1"x 5 1/4")=5|25.4x145 mm (1"x 5 3/4")=6|25.4x153 mm (1"x 6")=7|25.4x156.5 mm (1"x 6")=8|25.4x165.5 mm (1"x 6 1/2")=9|25.4x177 mm (1"x 7")=10|25x57.5 mm (1"x 2 1/4")=11 UPPER|26x56.5 mm (1"x 2 1/4")=11 LOWER|25.6x162mm (1"x 6 3/8")=12|Mortise Lock Dimensions|Imperial (Metric) (D x OL)=Template|16x72 mm* (5/8" x 2 7/8")=A|16x107 mm* (5/8" x 4 1/4")=B|19x78 mm* (3/4" x 3 1/8")=C|19x109 mm* (3/4" x 4 1/4")=D|24 mm x 24 mm (2 x circle)|*These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer. | Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks. |For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate. |Deeper mortises can be achieved with a suitable size of auger bit.|Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.|Steel plates & body.|An auger bit and drill is required to complete deep mortises.|The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise. | 1 x Guide Bush Collar|12 x Face Plate Templates|5 x Mortise Templates|6 x Spacer Fingers