Hinge jig B two part phenolic

Length=50 mm (2") to 127 mm (5")|Width min.=9.5 mm (3/8")|Width max.=35 mm (1 3/8")| |Door size possible|Height min=1955 mm (6' 5")|Height max.= 2100 mm*|Thickness min.= 16 mm (5/8")|Thickness max.=51 mm (2")|Jig overall length=1815 mm|Fixed stop max. thickness=11 mm**|* Please note for doors over 2000mm the bottom hinge will be higher than 9" up.|** Max. hinge leaf width 20mm (35mm doors) | A two part trade hinge jig to cut hinge recesses in doors & linings using a plunge router.|Two part, splits into two lengths with jointing plate. |Made from 12mm hardwearing CNC machined Compact Grade High Pressure Laminate.|One set up for door and frame. No need to adjust for repeated doors.|Four adjustable apertures.|For a 2 metre door hinges are 6 inch down and 9 inch up and the middle. Fourth hinge for fire doors (355mm /14 inches down from top of top hinge).|For doors 16mm to 51mm thick with separate (plant on) stops, or stops thinner than 11mm.|Swivel end plate for 3mm gap to head of door.|Use with a light duty plunge router with 1/4 inch collet.|Includes three edge guides, three bradawls and 16 mm guide bush. |Unibase may be needed.|T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160. | 3 x Bradawls with spacers|3 x Edge guides|1 x 16mm guide bush|1 x Hex key|1 x Carry case