Aperture Radius Jig

Corner angle=90 degree|Slot length=830 mm|Radius curves=40, 60, 80, 100, 150 & 250 mm|External radius=50, 100 & 200 mm|End cut=45 degrees|Kitchen hinge recess=26 mm & 35 mm|Length=1000 mm|Thickness=12 mm|Width=390 mm|Weight=4.6 kg | A jig to rout out apertures, recesses and radii in work tops to fit a range of sinks and hobs, and to suit curved cabinets.|Will cut both an internal and external radiius with the use of either pins or engraved sight lines.|Made from 12mm hardwearing CNC machined Compact Grade High Pressure Laminate.|Will cut a 90 degree angle, which when combined with the straight slot will allow a hob or sink aperture to be routed. Central slot allows cuts up to 820mm long.|Radius curves at 40mm, 60mm, 80mm, 100mm, 150mm and 250mm, and has external radii of 50mm, 100mm and 200mm|Jig has a 45 degree end cut , plus 26mm and 35mm cabinet door hinge recess facility.|Engraved lines to position jig to marked position on the worktop.|Each of the six radius curves is paired with a set of peg holes that will set the jig to work top edge.|Pins made from ABS plastic for strength.|Jig requires:|A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.|A template guide bush with 30mm outside diameter.|A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.|Two clamps. | 4 x Pins|1 x Manual|