Trend UNIBASE - Router base adaptor
graphic1
graphic6

Trend UNIBASE - Router base adaptor

Stock Code: UNIBASE
In Stock
£26.27 (exc VAT) per 1
Quantity: - +

Descriptions

Diameter=170 mm|Thickness=8 mm|Bore=39 mm|Recess=60 mm | The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers.|Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base. |Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch.|Instructions for fitting|The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10mm up to 30mm (GB10 - GB32). For larger diameter cutters a 40mm guide bush (GB40) is available.|Ideal for hinge jig and lock jig | 1 x Line up pin 8 & 12 mm shank|1 x Guide bush 16 mm|1 x Fixing screw pack

ManufacturerTrend

There are no downloads for this product.