Makita CLX205AJ 10.8V 2x2.0Ah CXT Li-ion Brushless Twin Kit

Makita CLX205AJ 10.8v CXT Brushless Combi Drill and Impact Driver Twin Kit. Model HP332D is a brushless cordless hammer driver drill and Model TD111D is a Cordless Impact Driver, both are powered by 10.8V Compact Extreme Technology (CXT) slide Li-ion battery. Makita’s ‘CXT’ range of 10.8v tools feature a slide battery, similar to the extremely successful 18v Li-Ion battery used in the heavier tool range, has multi-contact terminals to ensure stable contact even under extreme work vibration conditions. The slide battery fits easily into the tools and new chargers and has the same high level of structural strength as well as having built-in protection to prevent overload or over discharging.

HP332D Features and Benefits:

• Slide type Li-ion battery

• High efficiency brushless motor

• Electric brake

• 2 mechanical gears.

• Variable speed control by trigger

• Forward/reverse rotation

• Compact overall length of 168mm

• Equipped with Battery protection circuit: designed to protect the battery from damages due to over discharge, high temperature or overload current.

• Ergonomic soft grip

• Keyless Chuck

• LED job light

• Belt clip

TD111D Features and Benefits:

• New impact mode (A-mode): helps to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening

• Variable speed

• Electric brake

• Forward/reverse rotation

• LED job light

• Compact design with overall length of 135mm

• Brushless motor

• Ergonomic soft grip

• Two selectable Impact Modes (High/Low)

• Belt clip

HP332D Technical Specification:
Capacity in Steel - 10 mm
Capacity in Wood - 28 mm
Chuck Capacity - 0.8 – 10 mm
Capacity in Masonry - 8 mm
Blows per Minute (Hi) - ipm - 0 - 22,500 ipm
Blows per Minute (Lo) - ipm - 0 - 6,750 ipm
No Load Speed (Hi) - 0 - 1,500 rpm
No Load Speed (Lo) - 0 - 450 rpm
Voltage - 10.8 v
Max Torque S/H - 21 / 35 Nm
Torque Settings - 20 + Drill
Battery Type - Lithium-ion
Vibration K factor - 1.5 m/sec²
Noise sound pressure - 82 dB(A)
Noise sound power - 93 dB(A)
Noise K factor - 3 dB(A)
Body only machine
Net weight - 1.3 kg
Vibration: Impact drilling into concrete - 12.5 m/sec²
Vibration: Drilling into metal - 2.5 m/sec²

TD111D Technical Specification:
Voltage - 10.8 v
Drive shank Hex - 1/4 "
Standard Bolt - M5-M14
High Tensile Bolt - M5-M12
Coarse thread (length) - 22 - 90 mm
Max Torque - 135 Nm
Battery Type Lithium-ion
Vibration: Fastening Bolt 12.5 m/sec²
Vibration K factor 1.5 m/sec²
Noise sound pressure94 dB(A)
Noise sound power105 dB(A)
Noise K factor3 dB(A)
Body only machine
Net weight 1.1 kg
Blows per Minute (Hi) - ipm - 0 - 3900 ipm
Blows per Minute (Lo) - ipm - 0 - 1600 ipm
Machine Screw - M4-M8
No Load Speed (Hi) - 0 - 3000 rpm
No Load Speed (Lo) - 0 - 1300 rpm

Supplied With:
1 x 821549-5 - Makpac Connector Case (TYPE1)
1 x DC10WC - 10.8V Charger
1 x HP332DZ - 10.8V Brushless Combi Drill CXT
1 x TD111DZ - 10.8V Impact Driver BL CXT
2 x 197394-3 - Battery BL1020B