JCP Pure Epoxy Resin in 1:1 Cartridge - 250ml

A 1:1 pure Epoxy resin with high load capacities suitable for installing threaded rod and rebar in cracked and non-cracked concrete

Technical description of the product:
The JCP Epoxy Resin JF250E with steel elements is bonded anchor (injection type).
Steel elements can be galvanized or stainless steel threaded rod or rebar.
Steel element is placed into a drilled hole filled with injection mortar. The steel element
is anchored via the bond between metal part, injection mortar and concrete. The anchor
is intended to be used with embedment depth from 4 diameters to 20 diameters.

Base materials:
• Cracked and uncracked concrete.
• Reinforced or unreinforced normal weight concrete of strength class C20/25 at minimum and
C50/60 at maximum according EN 206-1:2000-12.

Information:

• Bonded injection type anchor for use in cracked and uncracked concrete

Concrete conditions:
• I1 – installation in dry or wet (water saturated) concrete and use in service in dry or wet concrete.

Design:
• The anchorages are designed in accordance with the EN 1992-4 under the responsibility of an
engineer experienced in anchorages and concrete work.
• Verifiable calculation notes and drawings are prepared taking account of the loads to be anchored.
The position of the anchor is indicated on the design drawings.
• Anchorages under seismic actions (cracked concrete) have to be designed in accordance with EN
1992-4.